A high-resolution MAS NMR study on the potential catalysts Mo/HBeta for olefin metathesis: The interaction of Mo species with HBeta zeolite

The interfacial interaction of Mo species with the HBeta zeolite was studied by multinuclear MAS NMR, XRD and N₂ adsorption. As proved by the quantitative ²⁷Al MAS NMR, this interaction is so strong as to dealuminate the framework of HBeta, and leads to a new peak appearing at −14 ppm, which indicates the formation of crystalline Al₂(MoO₄)₃. This can also be detected by XRD measurements when the Mo loading is as high as 9.0 wt.%. The corresponding quantitative ²⁹Si and ¹H MAS NMR spectra show that the amount of silanols and Brønsted acidic sites decrease obviously with increasing Mo loading. This also reveals an interaction between Mo species and HBeta support through an oxygen bridge resulting from condensation with the hydroxyls on the support. At higher Mo loadings, the interaction is so strong that it results in an extraction of aluminum from the zeolite framework, and subsequently appearance of Al₂(MoO₄)₃ and loss of Brønsted acidic sites. These can be correlated to the low catalytic activity of Mo/HBeta in metathesis of ethylene and 2-butylene to propylene.     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Structural studies on ruthenium(II) complexes used in interphase catalysis for the hydrogenation of ketones

Structural studies were performed on catalytically active ruthenium(II) complexes used in interphases, by means of XAFS spectroscopy. The EXAFS investigations indicate that the complexes retain their structural integrity when they are embedded on polysiloxane matrices to form stationary phase materials. The AXAFS studies reveal that the variations in the catalytic activity of the complexes with different ligands can be correlated to the differences in the electronic structure around the active ruthenium center. The EXAFS investigations show that, in asymmetric transfer hydrogenation reactions catalysed by ruthenium(II) complexes, the co‐catalyst plays a crucial role not only in enhancing the catalytic activity, but also in determining the structure of the intermediate species. Copyright © 2007 John Wiley & Sons, Ltd.     

ZnCl2/粘土-SA01催化剂上二苯甲烷的合成

在环境友好ZnCl2/粘土-SA01催化剂上合成了二苯甲烷,较系统地考察了负载量、苯/苄基氯摩尔比、催化剂用量、反应温度、反应时间对该傅克反应的影响,并与催化剂的表面性质关联.实验结果表明,该催化剂具有良好的催化活性和稳定性并易于回收重复使用.     

Ti－Si沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化

Ｔｉ－Ｓｉ沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化夏清华，王公慰，应慕良，郑禄彬（中国科学院大连化学物理研究所，大连１１６０１２）关键词Ｔｉ－Ｓｉ沸石催化剂，Ｈ_２Ｏ_２氧化剂，环己醇氧化，环己酮肟化．１．前言环己酮肟是生产ε－己内酰胺的关键中...     

氧化物担载铑原子簇催化剂的金属载体相互作用的考察——Ⅱ.金属载体非强相互作用

本文用XPS从Rh_4(CO)_(12)在真空条件下的脱羰过程和在氢氧中的还原过程两方面考察了一些非还原性氧化物担载Rh_4(CO)_(12)催化剂的金属载体相互作用,并把这种相互作用称为金属载体非强相互作用(non-strong metal-support interaction,缩写NSMSI).结果表明,铑与一些载体的非强相互作用的顺序是MgO>ZrO_2>γ-Al_2O_3>SiO_2-Al_2O_3≈SiO_2;Rh与载体的非强相互作用形成Rh—O键,使Rh的还原性减弱;形成M—O键是产生NSMSI效应的重要特征;这种相互作用能增加铑羰基物的稳定性,使其在真空中脱羰速率减慢.铑与非还原性氧化物载体间的非强相互作用可用酸-碱机制解释.     

CuO—ZnO／Al2O3—TiO2催化剂中TiO2的结构和电子效应

采用XPS,XRD,TPR,TPD和指标反应等方法研究了TiO_2在负载型CuO-ZnO/Al_2O_3-TiO_2催化剂中所起的作用.发现TiO_2起双重作用,即结构效应和电子效应,TiO_2的结构效应主要表现为它改善了CuO在载体上的分布.TiO_2的电子效应表现为它对Cu~0具有吸电子的作用,从而削弱了Cu和S之间的吸附力,使S容易脱除.另外,部分还原形成的Ti~(3+)具有促进CuS中的Cu~(2+)还原为Cu~0的能力,TiO_2的上述效应的综合结果使催化剂的抗硫中毒性能大大增强.     

双环戊二烯的催化氢脂基化制备三环单,双酯

双环戊二烯(DCPD)通过均相催化与一氧化碳及乙醇或甲醇反应生成四种三环单酯或三种三环双酯,其反应式如下: